Revolution 3D Printers are designed and built for fused deposition modeling for various high quality plastics like PLA, ABS, CPE, Nylon, PVA within a commercial/business environment. The mixture of precision and speed makes the Revolution 3D Printers the perfect machines for concept models, functional prototypes and also the production of small series. Although we achieved a very high standard in the reproduction of 3D models with the usage of Mattercontrol, the user remains responsible to qualify and validate the application of the printed object for its intended use. While being an open filament platform the best results will be achieved with Revolution 3D Printers certified filament, while effort has been made in order to match material properties with machine settings.



This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment can radiate unintentional radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. Operation of this equipment in a residential area may cause interference in which case the user will be required to correct the interference at his own expense.




The Infinity 3D operates on 12 volts (Extra-low-voltage) and is therefore outside the scope of the low-voltage directive. The power supply meets all CE mark regulations and is protected against short-circuit, overload, over voltage and over temperature. For more information concerning electrical safety aspects we refer you to the Mean Well EC-Conformity Declaration for the CX750M power supply.Only use the Infinity 3D with power supplies and cables supplied by Revolution 3D Printers Inc.

Caution: Always unplug the printer before doing maintenance or modifications.



The Infinity 3D contains many moving parts, but the stepper motors do not have enough power to cause serious injuries and moving gears have been covered. Still, it is advised to only reach in the machine when it is turned off.

Caution: Always unplug the printer before doing maintenance or modifications.



There is a potential risk of burns, as the print head can reach temperatures of up to 345°C. The nozzle(s) of the print head is mostly surrounded by an aluminum cover to prevent contact, but still we advise against reaching in the machine when the print head is hot.Caution: Always let the printer cool down for at least 30 minutes before doing maintenance or modifications.



Fused deposition modeling is known to release ultra-fine particles and can release volatile organic compounds and therefore it is recommended that operation of a 3D printer be done in a well ventilated area.


Caution: Only use your printer in a well-ventilated area.



The Infinity 3D is not intended for use by persons (including children) with reduced physical and/or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.Children should be under constant supervision when using the printer.

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide.

The conditions or methods used for assembling, handling, storage, use or disposal of the device are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, injuries, damage, or expense arising out of or in any way connected with the assembly, handling, storage, use or disposal of the product.

The information in this document was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness.